LED headlight bulb 880
1. Same size bottom base according to the halogen bulbs installation solution
2. Superconducting aluminum PCB + High flux LED chips matrix design as halogen bulbs + perfect heat conduction
3. Integrated adapter design in high strength, plug and play and last longer lifetime.
4. Using air cavity heat dissipation design based on the aerodynamics. Integrated design and aerial aluminum alloys can dissipate the heat in high efficiency.
Same size bottom base according with the halogen bulbs installing solution.
- Oblique View
Good beam pattern ensures driving safety
"TUFF PLUS" TrueBeam V4 series type security light
How can you have 2 seconds for reaction? If you drive a car in 100km speed, you need 1.7 second to react when you catch sight of danger and then make decision in your head, but in this 1.7 second your car moved 47.2m. TrueBeam V4 light beam can extend to 50m, which helps you get 2 more seconds to react on danger.
Brighter is not always better, without correct beam pattern, LED can shine in over the place, the unfocused light will be wasted, most light will be scattered and foggy, some of the area will be in dark spots. TrueBeam V4 LED bulbs can mask out of opposite road users. You have 200% more brightness while driving with high beam without glaring to opposite road users.Dangerous Type Light
Most of LED kits declare the brightness can reach up to 3000lm, but without correct optical design, most of light will be scattered and make the opposite road user glared.
6000K as the color temperature of mid-day sun light of summer, which gives comfort light output and good penetrability in foggy and raining days.Light Beam Test in Optical Laboratory: Low Beam (Down Beam)
Focus designed according to the ECE standard, but TrueBeam V4 has longer "lighting line" both on low beam and high beam, this makes a wider beam up to 30m on low beam, with better lighting at the edge of the road, and also makes the high beam thicker for longer distance lighting.
TemperatureJunction Temperature VS. Time
Housing temperature: When TrueBeam V4 LED bulbs work at 16W, the temperature of housing will become stable at 58°C after 15-20 minutes
Junction temperature: When TrueBeam V4 LED bulbs work at 16W, the junction temperature will become stable at 120°C after 12-18 minutes
Ambient Temperature: 25°C.
- Integrated fixed focal plate
Integrated Fixed Focal Plate
The majority of this series of products uses the integrated fixed focal plate design, reduce the connection pieces, and let the installation way closer to the halogen lamp
(1) Compact size driver can be easily located inside lamp housing
(2) The ultimate driver heat protection (DHP) technology ensures that the driver works with low temperature in high efficiency (up to 92%).
- Take out the original light bulb, and replace it with the LED light bulb
- Please connect to the original plug, and set the driver by zip tie and adhesive
- Open the headlight cover and take out the original light bulb, replace it with the LED bulb
- Connect to the original plug, use the double side adhesive to set the driver, and put the dust cover back
1. The above installation steps are suitable for installing distance light double lamp series
2. Before installation, please stop the car, and wait until car engine is cooled.
3. Refer to the manual, check whether the original car circuit conforms to the installation requirements.