These parameters are tested under 25℃, 10 minutes after lighting
Parameters of inputFunction | Current Under 12V(A) | Power Under 12V(A) | Current Under 24V(A) | Power Under 24V(W) | Current Under 30V(A) | Power Under 30V(W) |
Front position | 0.12 | 1.44 | 0.06 | 1.44 | 0.05 | 1.44 |
Low Beam | 1.33 | 15.96 | 0.67 | 16.08 | 0.54 | 16.08 |
High Beam | 2.56 | 30.72 | 1.26 | 30.24 | 1.03 | 30.24 |
Function | CURRENT(A) | VOLTAGE(V) | POWER(W) | P.F (%) |
Front position | 0.18 | 6.58 | 1.2 | 82.25 |
Low Beam | 2.17 | 6.46 | 14.0 | 87.83 |
High Beam | 4.13 | 6.46 | 26.7 | 86.85 |
A. An error-canceller is already built into the headlights. If the light flickers after installation in the vehicle, a resistor wire might be needed.
B. If you use this headlight to replace a motorcycle lamp, a motorcycle bracket may be needed if the light does not fit with the original brackets.
C. If the original plug in the car is H13, a converter may be needed. Please locate the converter in the bottom of the packaging container.
Related Products
vehicle headlamp, automotive LED light
Foshan Tuff Plus Auto Lighting Co.,Ltd.
Add.: No. 1 Ritian Road, Songxia Industrial Zone, Songgang Town, Nanhai District, Foshan City, Guangdong Province
Postcode: 528234
Tel: +0757-81760021